The M36-60-BLDC-Pro series is a 36mm diameter brushless DC motor with a 60mm body length, engineered for professional-grade applications requiring high torque density, continuous-duty reliability, and precision motion control. Building on the proven 36mm platform, this Pro series delivers an optimal balance of power and compactness, making it an ideal choice for system designers who need reliable brushless performance in a versatile form factor. The 60mm body length provides sufficient stator length for high torque output while maintaining a manageable overall size for integration into a wide range of mechanical interfaces.
The M36-60-BLDC-Pro delivers rated torque from 0.20 to 0.42 Nm with peak torque up to 1.1 Nm, depending on winding selection. No-load speeds range from 2,000 to 9,000 RPM, providing flexibility to optimize for either high-speed operation or high-torque actuation. The motor achieves peak efficiency of 87%, significantly reducing energy consumption and heat generation compared to brushed alternatives—a critical advantage in battery-powered mobile robotics and thermally constrained industrial systems.
The brushless architecture eliminates the mechanical brushes found in conventional DC motors, removing the primary wear component and substantially extending operational life. With a rated lifetime of 20,000+ hours under typical operating conditions, this motor offers four times the service life of equivalent brushed motors. The absence of brush arcing also reduces electromagnetic interference (EMI), enabling reliable integration with sensitive electronic control systems. Low cogging torque design ensures smooth rotation at all speeds, delivering consistent performance for precision positioning tasks.
Three integrated Hall-effect sensors provide commutation feedback to the electronic speed controller, enabling smooth startup, accurate speed regulation, and instantaneous direction changes. The Hall sensors ensure reliable starting under load conditions and stable performance across the entire operating speed range. For applications requiring closed-loop speed or position control, an optional magnetic or optical encoder with resolution up to 2,048 pulses per revolution (PPR) can be integrated on the rear shaft extension.
The 60mm body provides adequate surface area for heat dissipation, supporting continuous-duty operation in most applications. Double-shielded ball bearings at both ends ensure low rotational friction and long service life under radial and axial loads. The motor’s dynamic balancing process minimizes vibration, making it suitable for precision applications where stability is critical. For demanding environmental conditions, the motor can be supplied with IP54 (dust-protected and splash-resistant) or IP65 (dust-tight and wash-down capable) protection ratings. The standard insulation is Class F (155°C), with a Class H (180°C) upgrade available for high-temperature industrial applications.
The M36-60-BLDC-Pro series offers comprehensive customization options to support OEM integration. Customers can specify winding configurations to achieve target speed and torque characteristics, select shaft diameters of 6mm, 8mm, or 10mm with associated lengths, and define shaft end geometries including flat, keyway, D-cut, or spline. Planetary or spur gearboxes with reduction ratios from 3:1 to 100:1 are available for applications requiring torque multiplication. Additional options include encoder integration, electromagnetic holding brakes, custom lead wire lengths, and specialized connector terminations (Molex, JST, AMP, Deutsch, or custom designs). IP65-rated sealing and high-temperature insulation upgrades are also supported for volume orders.
Quality assurance is a cornerstone of the M36-60-BLDC-Pro series. Every motor undergoes 100% final testing to verify no-load speed, no-load current, Hall sensor functionality, insulation resistance, dielectric strength, vibration characteristics, and shaft runout. The production process is certified to ISO 9001:2015 quality management standards, and full RoHS and REACH compliance documentation is available for all materials and components. Engineering samples with matched electronic speed controllers are offered for application evaluation and system integration testing.
