-
32mm Brushless DC Motor with Brake – 60mm Length, Integrated Holding Brake, High Torque
The M32-60-BLDC-B series is a 32mm diameter brushless DC motor with an integrated fail-safe electromagnetic brake, featuring a motor body length of 60mm plus a compact brake unit. This integrated brake motor solution is specifically designed for applications requiring position holding, fall prevention, or emergency stopping capabilities. The combination of high-efficiency brushless motor technology with a reliable spring-engaged brake makes this platform ideal for safety-critical applications... -
28mm Brushless DC Motor – 58mm Length, High Efficiency, Compact Design
The M28-58-BLDC series is a 28mm diameter brushless DC motor with a 58mm body length, designed for applications requiring compact yet reliable brushless performance. This motor platform offers a significant performance upgrade over brushed motors of similar size, providing longer life, higher efficiency, and quieter operation. The combination of 28mm diameter and 58mm length delivers an excellent power-to-size ratio for robotics, medical equipment, industrial automation, and consumer applications where space is at a premium.
The M28-58 delivers rated torque from 0.10 to 0.25 Nm with peak torque up to 0.55 Nm, depending on winding selection. No-load speeds range from 2,000 to 12,000 RPM, allowing designers to optimize for either high-speed or high-torque applications. The 58mm body length delivers approximately 20-25% higher torque output compared to shorter 28mm motors (such as 28×40mm versions) while maintaining the same diameter, making it an excellent choice when additional torque is needed without increasing motor diameter. The brushless design provides high efficiency (up to 85%), reducing heat generation and improving energy economy compared to brushed alternatives.
Unlike traditional metal brush DC motors that require periodic brush replacement and suffer from electrical arcing, the brushless design eliminates mechanical commutation entirely. Typical operational life reaches 15,000+ hours—three times longer than equivalent brushed motors. The absence of brushes also eliminates electrical arcing, reducing EMI and making the motor suitable for sensitive medical and electronic environments. Low cogging torque design ensures smooth rotation even at very low speeds, critical for precision positioning applications.
Three integrated hall effect sensors provide commutation feedback for electronic speed controllers (ESC) and enable precise speed control, direction changes, and smooth starting from zero speed. The hall sensors allow the motor to start reliably under load and maintain stable operation across a wide speed range. For closed-loop speed or position control, an optional magnetic or optical encoder (up to 1,024 PPR) can be added to the motor rear shaft.
The 58mm body length provides adequate surface area for passive heat dissipation in most applications. Double-shielded ball bearings on both ends ensure low friction and long service life even under continuous duty. Dynamic balancing of the rotor assembly minimizes vibration, important for precision applications such as camera gimbals and surgical instruments. The housing can be specified with IP54 protection (dust-protected and water-resistant) for demanding environments. Insulation is Class F (155°C) as standard.
OEM customers can specify winding voltage and speed/torque characteristics, shaft diameter (4mm, 5mm, or 6mm), shaft length, and end configurations including flat, keyway, or D-cut. Gearbox attachments (planetary or spur) with reduction ratios from 3:1 to 100:1 are available for torque multiplication. Custom lead wire length and connector terminations (Molex, JST, or custom) are supported. Encoder integration and electromagnetic brake options are available for volume orders.
Each M28-58-BLDC motor undergoes 100% final inspection including no-load speed, no-load current, hall sensor functionality, insulation resistance, dielectric strength, and vibration testing. Production follows ISO 9001:2015 quality management processes. RoHS and REACH compliance documentation is available. Sample motors with matched electronic speed controllers are available for engineering evaluation.
-
High-Speed 10mm Brushless Coreless DC Motor for Drone Electric Bicycle Boat & Fan-Flange Mount
- High-Speed Performance: 16000 rpm and 520W power for exceptional speed and efficiency.
- Efficient Motor: 81.3% maximum efficiency, ideal for various applications.
- Compact Design: 10mm diameter for space-saving installation in compact devices.
- Flange Mount: Easy integration into drones, electric bicycles, boats, and fans.
- Robust Operation: 1229.91 mNm torque for reliable performance.
-
45mm High-Power Brushless DC Motor – 50mm Length, Compact Heavy-Duty Design
The M45-50-BLDC-Pro series is a 45mm diameter brushless DC motor with a compact 50mm body length, specifically designed for applications requiring substantial torque output in a short-form-factor package. This motor platform delivers significantly higher power density than smaller 36mm and 40mm frames, making it an ideal choice for electric mobility, automated guided vehicles (AGVs), medical equipment, and industrial automation systems where space is limited but torque requirements are high.
The M45-50-BLDC-Pro delivers rated torque ranging from 0.80 to 2.00 Nm depending on the selected winding, with peak torque reaching up to 8.0 Nm for demanding load conditions. No-load speeds are available from 1,500 to 8,000 RPM, providing flexibility to optimize for either high-speed or high-torque applications. The motor achieves peak efficiency of 88%, significantly reducing energy consumption and heat generation compared to brushed alternatives—a critical advantage for battery-powered electric mobility platforms and thermally constrained industrial systems.
The brushless architecture eliminates the mechanical brushes found in conventional DC motors, removing the primary wear component and substantially extending operational life. With a rated lifetime of 15,000+ hours under typical operating conditions, this motor offers three to four times the service life of equivalent brushed motors. The absence of brush arcing also reduces electromagnetic interference (EMI), enabling reliable integration with sensitive electronic control systems. The motor’s low cogging torque design ensures smooth rotation at all speeds, delivering consistent performance for precision motion control applications.
Three integrated Hall-effect sensors provide commutation feedback to the electronic speed controller, enabling smooth startup, accurate speed regulation, and instantaneous direction changes. The Hall sensors ensure reliable starting under load conditions and stable performance across the entire operating speed range. For applications requiring closed-loop speed or position control, an optional magnetic or optical encoder with resolution up to 2,048 pulses per revolution (PPR) can be integrated on the rear shaft extension.
The compact 50mm body length provides adequate surface area for heat dissipation in most operating conditions, while optional ventilation slots can be added for enhanced cooling in continuous-duty applications. Double-shielded ball bearings at both motor ends ensure low rotational friction and long service life under radial and axial loads. The motor’s dynamic balancing process minimizes vibration, making it suitable for precision applications where operational stability is critical. For challenging environmental conditions, the motor can be supplied with IP54 (dust-protected and splash-resistant) or IP65 (dust-tight and wash-down capable) protection ratings. The standard insulation is Class F (155°C), with a Class H (180°C) upgrade available for high-temperature industrial environments.
The M45-50-BLDC-Pro series offers comprehensive customization options to support OEM integration. Customers can specify winding configurations to achieve target speed and torque characteristics, select shaft diameters of 10mm, 12mm, 14mm, or 15mm with associated lengths, and define shaft end geometries including flat, keyway, D-cut, or spline. Planetary or spur gearboxes with reduction ratios from 3:1 to 100:1 are available for applications requiring further torque multiplication. Additional options include encoder integration, electromagnetic holding brakes, custom lead wire lengths, and specialized connector terminations (Molex, JST, AMP, Deutsch, or custom designs). IP65-rated sealing and high-temperature insulation upgrades are also supported for volume orders.
Quality assurance is a cornerstone of the M45-50-BLDC-Pro series. Every motor undergoes 100% final testing to verify no-load speed, no-load current, Hall sensor functionality, insulation resistance, dielectric strength, and vibration characteristics. The production process is certified to ISO 9001:2015 quality management standards, and full RoHS and REACH compliance documentation is available for all materials and components. Engineering samples with matched electronic speed controllers are offered for application evaluation and system integration testing.
-
36mm High-Performance Brushless DC Motor – 70mm Length, High Efficiency, Long Life
The M36-70-BLDC-Pro series represents a significant advancement in 36mm brushless DC motor technology, combining a 36mm diameter frame with an extended 70mm body length to deliver superior torque output for demanding applications. This motor platform has been specifically engineered to provide higher continuous torque capability than shorter 36mm motors, making it suitable for applications requiring sustained power delivery without increasing motor diameter. The Pro series is ideal for system designers who need reliable, high-performance actuation in robotics, medical equipment, industrial automation, and advanced consumer appliances.
The M36-70-BLDC-Pro delivers rated torque from 0.25 to 0.50 Nm with peak torque reaching 1.2 Nm, offering substantial power reserve for dynamic operating conditions. No-load speeds are available from 1,500 to 8,000 RPM, providing flexibility to match application requirements ranging from high-speed operation to high-torque, low-speed actuation. The motor achieves peak efficiency of 88%, resulting in lower operating temperatures and reduced energy consumption—a critical advantage in battery-powered and thermally constrained systems.
The brushless architecture eliminates the mechanical brushes found in conventional DC motors, removing the primary wear component and significantly extending operational life. With a rated lifetime of 20,000+ hours under typical operating conditions, this motor offers four to five times the service life of equivalent brushed motors. The absence of brush arcing also reduces electromagnetic interference (EMI), enabling reliable integration with sensitive electronic systems in medical and laboratory environments. The motor’s low cogging torque design ensures smooth rotation at all speeds, delivering consistent performance for precision positioning tasks.
Three integrated Hall-effect sensors provide commutation feedback to the electronic speed controller, enabling smooth startup, accurate speed regulation, and instantaneous direction changes. The sensor feedback ensures reliable starting under load conditions and stable performance across the entire operating speed range. For applications requiring closed-loop speed or position control, an optional magnetic or optical encoder with resolution up to 2,048 pulses per revolution (PPR) can be integrated on the rear shaft extension.
The extended 70mm body provides substantial surface area for efficient heat dissipation, supporting continuous-duty operation even at elevated ambient temperatures. Double-shielded ball bearings at both motor ends ensure low rotational friction and long service life under radial and axial loads. The motor’s dynamic balancing process minimizes vibration, making it suitable for precision optics and imaging applications where stability is critical. For challenging environmental conditions, the motor can be supplied with IP54 (dust-protected and splash-resistant) or IP65 (dust-tight and wash-down capable) protection ratings. The standard insulation is Class F (155°C), with a Class H (180°C) upgrade available for high-temperature industrial applications.
The M36-70-BLDC-Pro series offers comprehensive customization options to support OEM integration. Customers can specify winding configurations to achieve target speed and torque characteristics, select shaft diameters of 6mm, 8mm, or 10mm with associated lengths, and define shaft end geometries including flat, keyway, D-cut, or spline. Planetary or spur gearboxes with reduction ratios from 3:1 to 100:1 are available for applications requiring torque multiplication. Additional options include encoder integration, electromagnetic holding brakes, custom lead wire lengths, and specialized connector terminations (Molex, JST, AMP, Deutsch, or custom designs). IP65-rated sealing and high-temperature insulation upgrades are also supported for volume orders.
Quality assurance is a cornerstone of the M36-70-BLDC-Pro series. Every motor undergoes 100% final testing to verify no-load speed, no-load current, Hall sensor functionality, insulation resistance, dielectric strength, and vibration characteristics. The production process is certified to ISO 9001:2015 quality management standards, and full RoHS and REACH compliance documentation is available for all materials and components. Engineering samples with matched electronic speed controllers are offered for application evaluation and system integration testing.
-
Φ35×64mm BLDC Motor – 12V/24V/48V, Low Noise, 20,000+ Hours Life
The M35-64-BLDC series is a 35mm diameter brushless DC motor with a 64mm body length. This motor platform is designed for applications requiring greater torque output than 32mm motors while maintaining a smaller footprint than 40mm and 42mm frames. The combination of 35mm diameter and 64mm length delivers an excellent power-to-size ratio for robotics, medical equipment, industrial automation, and consumer appliances, offering a versatile solution that fits a broad range of design requirements.
The M35-64 delivers rated torque from 0.20 to 0.42 Nm with peak torque up to 1.1 Nm, depending on winding selection. No-load speeds range from 1,800 to 9,000 RPM, allowing designers to optimize for either high-speed or high-torque applications. The motor delivers approximately 20-25% higher torque output compared to 32mm diameter motors while maintaining a comparable length, representing a significant performance upgrade within a similar form factor. The brushless design provides high efficiency (up to 87%), reducing heat generation and improving energy economy compared to brushed alternatives.
Unlike traditional metal brush DC motors that require periodic brush replacement and suffer from electrical arcing, the brushless design eliminates mechanical commutation entirely. Typical operational life reaches 20,000+ hours—four times longer than equivalent brushed motors. The absence of brushes also eliminates electrical arcing, reducing EMI and making the motor suitable for sensitive medical and electronic environments. Low cogging torque design ensures smooth rotation even at very low speeds, critical for precision positioning applications.
Three integrated hall effect sensors provide commutation feedback for electronic speed controllers (ESC) and enable precise speed control, direction changes, and smooth starting from zero speed. The hall sensors allow the motor to start reliably under load and maintain stable operation across a wide speed range. For closed-loop speed or position control, an optional magnetic or optical encoder (up to 2,048 PPR) can be added to the motor rear shaft.
The 64mm body length provides adequate surface area for passive heat dissipation in most applications. Ball bearings (double shielded) on both ends ensure low friction and long service life even under continuous duty. Dynamic balancing of the rotor assembly minimizes vibration, critical for precision applications. The housing can be specified with IP54 protection (dust-protected and water-resistant) or IP65 (wash-down capable) for demanding environments. Insulation is Class F (155°C) as standard, with Class H (180°C) available for high-temperature applications.
OEM customers can specify winding voltage and speed/torque characteristics, shaft diameter (6mm, 8mm, or 10mm), shaft length, and end configurations including flat, keyway, D-cut, or spline. Gearbox attachments (planetary or spur) with reduction ratios from 3:1 to 100:1 are available for torque multiplication. Custom lead wire length and connector terminations (Molex, JST, AMP, Deutsch, or custom) are supported. Encoder integration, electromagnetic brake options, and IP65 sealing are available for volume orders.
Each M35-64-BLDC motor undergoes 100% final inspection including no-load speed, no-load current, hall sensor functionality, insulation resistance, dielectric strength, vibration testing, and shaft runout measurement. Production follows ISO 9001:2015 quality management processes. RoHS and REACH compliance documentation is available. Sample motors with matched electronic speed controllers are available for engineering evaluation.
-
XBD-4070 Factory Wholesale Robot Automobile Permanent Magnet DC IP54 Carbon Coreless Brush Motor
- Permanent Magnet Construction: Ensures high efficiency and long lifespan.
- High Torque Output: Delivers powerful performance for various applications.
- Brushless Design: Reliable and maintenance-free operation.
- Efficient Power Transfer: Achieves optimal power delivery with minimal loss.
- Compact Design: Easy integration into compact machinery.
-
XBD-3257 BLDC Motor with Gearbox 1229.91mNm Torque 16000RPM Explosion-Proof Protection for Smart Home & Home Appliances
- High Efficiency Motor: Operates at up to 81.3% max efficiency for energy savings.
- Explosion-Proof Protection: Ensures safe use in hazardous environments.
- Compact Design: Measures 32mm, ideal for compact smart home appliances.
- Durable Construction: Built for long-term reliability with robust materials.
- Wide Voltage Range: Compatible with 12V to 24V, versatile for various applications.
-
ODM XBD-2057 BLDC Motor Permanent Magnet 1229.91mNm Torque 16000RPM Explosion-Proof Protection Flange Mount for Smart Home Home
- High Torque (1229.91mNm): Provides powerful performance for smooth operation.
- 16000 RPM Speed: Ensures high-speed efficiency in various applications.
- Explosion-Proof Design: Safely operates in hazardous environments.
- Compact Size (40mm): Easy to integrate into small spaces.
- Brushless Motor Technology: Offers long life and low maintenance.
-
XBD-2245 Premium Compact 5000 RPM High Torque BLDC Motor Brushless with High Torque for Drones & Robotics OEM Support
- High Speed Performance: Achieves up to 16,000 RPM for efficient operation.
- Compact Design: 22mm diameter, ideal for space-constrained applications.
- Brushless Technology: Reliable and maintenance-free construction.
- Efficient Operation: Low voltage 12V nominal voltage for energy savings.
- Direct Factory Pricing: Competitive pricing without middlemen.
-
32mm Brushless DC Motor – 74mm Length, High Torque, Extended Body Design
The M32-74-BLDC series is a 32mm diameter brushless DC motor with an extended 74mm body length. This high-performance motor platform is designed for applications requiring greater torque output than the standard 60mm version while maintaining the same 32mm diameter for compatibility with existing mounting configurations. The extended body length accommodates a longer stator with additional copper windings and stronger rare-earth magnets, delivering approximately 40-50% higher torque output compared to its 60mm counterpart.
The M32-74 delivers rated torque from 0.25 to 0.50 Nm with peak torque up to 1.4 Nm, depending on winding selection. No-load speeds range from 1,500 to 9,000 RPM, allowing designers to optimize for either high-speed or high-torque applications. This extended body platform delivers approximately 40-50% higher torque output compared to the 60mm version while maintaining the same 32mm frame diameter. The brushless design provides high efficiency (up to 87%), reducing heat generation and improving energy economy compared to brushed alternatives.
Unlike traditional metal brush DC motors that require periodic brush replacement and suffer from electrical arcing, the brushless design eliminates mechanical commutation entirely. Typical operational life reaches 20,000+ hours—four times longer than equivalent brushed motors. The absence of brushes also eliminates electrical arcing, reducing EMI and making the motor suitable for sensitive medical and electronic environments. Low cogging torque design ensures smooth rotation even at very low speeds, critical for precision positioning applications.
Three integrated hall effect sensors provide commutation feedback for electronic speed controllers (ESC) and enable precise speed control, direction changes, and smooth starting from zero speed. The hall sensors allow the motor to start reliably under load and maintain stable operation across a wide speed range. For closed-loop speed or position control, an optional magnetic or optical encoder (up to 2,048 PPR) can be added to the motor rear shaft.
The extended 74mm body length provides enhanced surface area for passive heat dissipation, enabling higher continuous current handling compared to shorter frame motors. Ball bearings (double shielded) on both ends ensure low friction and long service life even under continuous duty. Dynamic balancing of the rotor assembly minimizes vibration, critical for precision applications. The housing can be specified with IP54 protection (dust-protected and water-resistant) or IP65 (wash-down capable) for demanding environments. Insulation is Class F (155°C) as standard, with Class H (180°C) available for high-temperature applications.
OEM customers can specify winding voltage and speed/torque characteristics, shaft diameter (6mm, 8mm, or 10mm), shaft length, and end configurations including flat, keyway, D-cut, or spline. Gearbox attachments (planetary or spur) with reduction ratios from 3:1 to 100:1 are available for torque multiplication. Custom lead wire length and connector terminations (Molex, JST, AMP, Deutsch, or custom) are supported. Encoder integration, electromagnetic brake options, and IP65 sealing are available for volume orders.
Each M32-74-BLDC motor undergoes 100% final inspection including no-load speed, no-load current, hall sensor functionality, insulation resistance, dielectric strength, vibration testing, and shaft runout measurement. Production follows ISO 9001:2015 quality management processes. RoHS and REACH compliance documentation is available. Sample motors with matched electronic speed controllers are available for engineering evaluation.
-
XBD-1928 Factory Wholesale Robot Automobile Permanent Magnet DC Explosion-proof 3000W 19mm Frame Carbon Coreless Brushless Motor
- High Efficiency: IE1 standard ensures maximum energy savings.
- Robust Construction: Permanent Magnet design for durability and performance.
- Compact Design: 19mm frame size for space-saving applications.
- Precision Speed Control: 16000 rpm nominal speed for precise control.
- Low Voltage Operation: Operates efficiently at 12V nominal voltage.
