We are proud to announce that our coreless motor manufacturing facility has achieved carbon neutrality in its production operations, verified by an independent third-party auditor. This milestone is part of our broader commitment to achieving Net Zero emissions across our entire value chain by 2035.
The carbon neutrality certification covers Scope 1 (direct emissions from owned sources) and Scope 2 (indirect emissions from purchased energy) greenhouse gas emissions associated with our main production line, assembly workshop, and administrative operations for the fiscal year 2025. The verification process was conducted by SGS, a globally recognized inspection and certification body, following the ISO 14064-1:2018 standard.
Three Pillars of Our Decarbonization Strategy:
Pillar 1 – Energy Efficiency Improvements:
Our engineering team has implemented a comprehensive energy management system that continuously monitors and optimizes energy consumption across all production processes. Key initiatives include:
- High-Efficiency Motor Testing Systems: Our new motor testing and burn-in stations use regenerative power supplies that capture and recycle up to 85% of the energy normally wasted as heat during testing.
- Smart Lighting and HVAC: The entire 15,000-square-meter facility is equipped with IoT-enabled LED lighting and variable-speed HVAC systems that automatically adjust based on occupancy and production schedules, reducing facility energy consumption by 37% compared to previous levels.
- Precision Winding Optimization: By optimizing winding machine parameters and processes, we have reduced the energy consumption of our winding stations by 22% while maintaining the same production output.
Pillar 2 – Renewable Energy Integration:
To address the remaining energy requirements after efficiency improvements, we have invested in on-site and off-site renewable energy generation:
- Solar Photovoltaic Installation: Our rooftop solar array, consisting of 1,800 high-efficiency monocrystalline panels, generates approximately 850 MWh of clean electricity annually, covering about 40% of our facility’s total electricity needs.
- Green Power Purchase Agreements (PPAs): For the remaining 60% of electricity consumption, we have entered into a long-term green power purchase agreement with a local renewable energy provider, guaranteeing that all purchased electricity is sourced from wind and hydroelectric facilities.
- Biomass Heating: Our factory’s heating system has been converted to utilize biomass pellets derived from agricultural waste, eliminating the use of natural gas for space heating.
Pillar 3 – Supply Chain Engagement:
Recognizing that our indirect emissions (Scope 3) constitute the majority of our carbon footprint, we have launched a supplier sustainability program:
- Our top 50 suppliers, representing 80% of our procurement spending by value, have been required to submit their own carbon reduction targets and progress reports.
- We have partnered with the Carbon Trust to provide technical assistance to smaller suppliers who lack in-house sustainability expertise.
- A preferred supplier tier has been established, giving procurement preference to vendors who demonstrate strong environmental performance.
Environmental Achievements to Date:
| Metric | 2024 Baseline | 2025 Result | Reduction |
|---|---|---|---|
| Energy Intensity (kWh/unit) | 2.85 | 1.92 | 32.6% |
| Water Consumption (L/unit) | 18.5 | 12.3 | 33.5% |
| Waste to Landfill (kg/unit) | 0.42 | 0.18 | 57.1% |
| VOC Emissions (g/unit) | 15.2 | 8.7 | 42.8% |
Circular Economy Initiatives:
Beyond carbon reduction, we have also made significant strides in material circularity. Our copper winding scrap is now fully recycled through an in-house reclamation system, which processes scrap copper back into high-purity wire for reuse in motor production. Similarly, our magnet manufacturing process has been modified to utilize recycled rare earth materials, reducing our reliance on virgin mining while maintaining magnetic performance specifications.
“Reaching carbon neutrality in our production operations is an important milestone, but it is truly just the beginning,” said our Chief Sustainability Officer, Ms. Liu Wei. “Our real goal is to pioneer sustainable manufacturing practices that can be adopted across the entire precision machinery industry. We are open to sharing our experiences and techniques with any manufacturer interested in reducing their own environmental footprint
Post time: Jun-18-2026