How to extend the motor life of brushless motor?

1. Keep it clean: Clean the brushless motor surface and radiator regularly to prevent dust and impurities from accumulating and affecting the heat dissipation effect, and to avoid entering the inside of the motor and affecting normal operation.

2. Control the temperature: Avoid the brushless motor working in a high temperature environment for a long time. Excessive temperature will affect the insulation and magnetic properties of the motor, resulting in shortened motor life. The motor temperature can be reduced through radiators, fans, etc.

3. Avoid overloading: Avoid long-term overload operation. Overloading will cause serious heating of the motor, damage the winding insulation, and reduce the life of the motor. Motor capacity should be selected reasonably during design and use to avoid overloading.

4. Prevent moisture intrusion: The inside of our Sinbad brushless motor should be kept dry to avoid moisture intrusion to prevent insulation aging and winding short circuit.

5. Reasonable installation: When installing a brushless motor, ensure that it is firmly and stably fixed and avoid vibration and impact to reduce mechanical damage.

6. Avoid frequent starts and stops: Frequent starts and stops will accelerate the wear of the motor and affect its service life. Try to avoid frequent starts and stops.

7. Use a suitable power supply: Use a power supply that meets the requirements to avoid excessive voltage fluctuations, which may cause damage to the motor windings and electronic components.

8. Regular inspection and maintenance: Regular inspection and maintenance of brushless motors, including checking the insulation performance of the motor, bearing wear, working status of sensors and controllers, etc., to find problems in time and carry out repairs.

9. Reasonable use: When using a brushless motor, you should follow its rated working conditions and specifications to avoid overloading, long-term no-load and other operations that are detrimental to the life of the motor.

10. Choose high-quality products: When purchasing brushless motors, choose products with reliable quality and stable performance to avoid using inferior products that will affect the life of the motor.